This ride height gauge measures from 2.6 up to 5.8 mm in .2 mm increments to keep your car set- up on point. Labeled pads make it easy to read and the rear extension gives you a secure grip under even the lowest chassis....see more

We designed this tool stand to hold the essential tools we've found ourselves using over the last 20 years of travel racing. Its designed to hold HUDY tools (or any tools with a ~17.8 mm handle diameter) with the bases down to lower the center of gravity and stabilize everything. The stand also has optional fold out feet that slide under your pit mat to make it all but impossible to knock over in those last second thrashings we all dread. There's a spacious tray in the front for your miscellaneous needs like turnbuckle wrenches, body clips, gum, bind plugs, etc. In addition to the 7 spaces for the standard electric racing tools, there's also dedicated spaces for the following: -Sharpie -HUDY shock pliers -HUDY body reamer -straight scissors -curved scissors -NT Cutter/knife -Tweezers -Coast G10 Flashlight...see more

Keep your tires organized and secure with our simple and easy to use Tire Sticks. Simply slide 4 sedan tires on and set them aside as a set without worrying about knocking them over. Great for packing to and from travel races as well as your local race place! Fits most major sedan tires. Sold in pairs....see more

The Team QIK 1/10 sedan wheel center plugs make all the difference when it comes to gluing 1/10th scale tire sidewalls. They fit snugly into the center of the wheel and are dimpled at the center to allow racers to use our Wheel Arch Compass (https://teamqikracing.com/products/wheel-arch-compass) as a scribe to mark gluing diameters (rotate CCW so as not to cut the tire). When coupled with one of our Tire Glue Carousels (https://teamqikracing.com/products/tire-glue-carousel), there isn't a more accurate method to glue your sidewalls to an exact diameter race after race. This consistency in sidewall glue application is one of the greatest edges the racers ahead of you have discovered. Includes clearly marked centers to fit Jaco, Gravity (USGT, VTA and slicks), and Hudy wheels, which may also fit a variety of other wheels....see more

Adjusting camber on a 4WD touring car is a critical piece of a fast set-up. Its not always easy to get a 2 mm ball-end hex wrench, much less a straight cut 2 mm hex wrench, into the confinements of a modern suspension. Our 2.0 mm camber wrench eliminates this issue with its L-shaped geometry. In addition, the 90 degree bend gives you the added leverage to make ultra precise adjustments without strain and the smooth handle remains comfortable during those multi-hour wrench sessions. While designed with the Xray X4 specifically in mind, this wrench works great in lots of other cars and situations....see more

A body that drags the racing surface is a sure fire way to slow your car down. Eliminate that situation and still keep your body low using our body height marking tool. With the car race-ready with the body in the correct position, insert the supplied ultra-fine Sharpie and rotate the tool to show how far off the surface you need the body. In general asphalt surfaces can tolerate a lower body as the lower grip produces less body pitch and the harder surface produces less drag. Height is adjustable from 8-11 mm when cut in the center of the line with a further .5 mm available in each direction if you cut carefully at the top or bottom of the line....see more

Our Manual Tire Glue Carousel is perfect for the budget minded racer trying to get their sidewall glue perfect. No motors, sharp graphics, low weight, and spins smoother than the day is long. Its also great for your travel equipment when you don't want to mess with TSA asking what a TGC is! Adapters are available for 1/10th scale on-road, 12th scale pan cars, 10th scale F1, 10th scale pan cars, and even 10th scale offroad. Be sure to select the adapter you need when you add to cart. The Manual TGC includes your preferred adapter and your choice of edge ring color. Additional adapters are available separately here. (http://teamqikracing.com)...see more

Front tire sidewall gluing is critical in 12th scale racing, for both foam and rubber tires. This arbor mounts to the oh-so common Much-More and Sky RC style 10th scale tire sanders (those with a 5 mm shaft) and allows you to spin up your 12th scale tires to touch up/reduce the sidewall glue diameter with a file. Also useful to completely remove the sidewall glue when conditions dictate. While the tire sander spins tires much too fast and eccentrically to glue the sidewalls reliably check out our line of TGCs (Tire Glue Carousels) to nail down your sidewall glue game....see more

While the quarter-drop method of measuring if your pan car is tweaked works reliably with foam tires, you may find yourself running out of patience when using it to work on a rubber tire GT12 car. Because these tires balloon as they age, the tire can become unbalanced leading to inconsistencies in finding and correcting tweak. More than once we've found ourselves chasing our tails to correct what we thought was a tweak in our GT12 only to find we just had an unbalanced tire and we weren't getting the tire in the same position every time. Our GT12 Tweak Wheel Inserts eliminate this by staying attached to the tire in the same position while you tweak the car. As an added benefit, you won't have to balance the quarters on the tire each time you check either. Simply press the insert into the spokes and position them to point forward. Then lift the car from the middle with a wrench and notice which wheel moves first. Adjust your suspension to correct this tweak and repeat the process until the wheels move at the same time. Sold as a pair....see more

When mounting a 12th scale body it can be difficult to get the rear wheel arches centered to the wheels because the axle is recessed into the wheel. With our clear vinyl center marked dots, this is no longer a frustration. Simply peel and stick the adhesive backed dot onto your rear wheel taking care to center it (this is very simple as the dot is the same diameter as the wheel) Once your body post holes are made, slide the body onto your race ready car and use a sharpie to mark the center of your axle on the Lexan. Perfect for use with our Wheel Arch Compass (https://teamqikracing.com/search?q=compass&options%5Bprefix%5D=last) to get the perfectly located rear wheel arches! Sold in a pack of 10 (if you're careful and store on wax paper etc. each dot can be reused multiple times)...see more